Single-Piece Implant for Immediate Loading With Compression Thread

KOS ROOT^® implants are used for crowns, bridges and bars. The compression screw design permits to incorporate the restoration in an immediate loading protocol (incorporation of the prosthesis within max. three days). The single-piece design saves costs, avoids the danger of periimplantitis and prevents the problem of screw loosening. KOS ROOT^® implants are straight with a prosthetic head for cementation.

KOS^® Classic implants have a compression thread and can be supplied in the immediate loading protocol, for which only very few working steps are required. The implant design has no micro gap. The implants are made of highly resistant titanium alloy.

KOS^® Classic X implants have a compression thread and can be supplied in the immediate loading protocol, for which only very few working steps are required. The implant design has no micro gap. The implants are made of highly resistant titanium alloy.

KOS^® B implants are suitable for bridges in the reduced-load range. The bendable implant now offers double safety:

• 1. Torque reduction by pre-compression with the congruent bone-expanding screw
• 2. Safety head with predetermined breaking point and dual square

KOS^® Plus implants have vertical grooves for anti-rotation protection and have no micro gap. The polished apical cutting thread is used for anchorage in the opposite cortical. The implant design combines the advantages of the compression screw with the advantages of the bicortical screw. Thus, in addition to the bone compression, the anchorage is in the 2^nd cortical bone (opposite cortical bone). The endosseous part is provided with the special No-Itis^® laser surface. Optimum primary stability thanks to micro thread and aggressive apical thread. KOS^® PLUS implants can be used in the maxilla and mandible and are made of highly resistant titanium alloy.

KOS^® TX implants are compression screw implants with an extended polished and bendable neck. The implants are suitable for anchorages in the tuberosity and in regions with large mucosal thickness and are preferably used without flap formation. The nominal diameter is reached at the widest part of the compression thread.

KOS^® MU implants feature a pre-angulation of 15 degrees and can also be bent additionally, using the insertion tool. In conjunction with the clinically possible rotational positions of the head, virtually all angulations can be realised. The implants are made of highly resistant titanium alloy.

KOS^® K implants are perfectly manufactured precision implants with a ball head. They are used for fixation of prostheses with nylon caps and are made of titanium alloy.

KOS^® M implants are suitable for the anterior region and tight gaps and are preferably used in an immediate loading protocol. Unlike other compression screws, the polished neck has a cylindrical shape. The cortical is sealed, good retention is achieved and the bone is protected against infections. The endosseous implant part compresses the cancellous bone areas.

KOS^® Micro implants have vertical grooves for anti-rotation protection. The single-piece design reduces costs, avoids the danger of periimplantitis and prevents the problem of screw loosening. Suitable for all applications, crowns, bridges and bars. The implant design has an optimal primary stability thanks to the micro thread and the compression screw design. The enossal part is provided with the special No-Itis^® laser surface.

KOS^® Mini implants are inserted into the bone self-tapping and under bone compression. The implants have a design-related high stability in soft as well as dense bone. Full osteotomy is not required for implantation as the implants are inserted into small pilot holes. Different matrices for individual retention allow up to 30° axial divergence between two implants. The original retention can be restored by replacing the O-ring.